Under Sink vs Wall Mounted Water Purifiers: Which is Right for You?

When it comes to choosing a water purifier for your home, there are many factors to consider, including the type of purifier, the size of the unit, and the installation location. Two popular options are under-sink water purifiers and wall-mounted water purifiers, each with its own set of benefits and... Read more"Under Sink vs Wall Mounted Water Purifiers: Which is Right for You?"

3 Best Under Sink RO Water Purifiers in India – Reviews

Water purifiers have become an integral part of our lives. Today I am going to talk about a type of water purifier that is not so common in Indian homes. Unlike India, under-sink water purifiers are the preferred choice for homes in the U.S. and Europe. However, these water purifiers... Read more"3 Best Under Sink RO Water Purifiers in India – Reviews"

RO Water Purifiers

According to a World Bank report, “water quality in India has deteriorated as a result of an uncontrolled discharge of raw domestic and industrial waste-water”. Indian cities are lagging behind in providing reliable, sustainable, and affordable water supply. Due to these disturbing trends, people are finding RO purifiers as the... Read more"RO Water Purifiers"

RO+UV Water Purifiers

According to The Hindu (March 2010), “Polluted drinking water claim more lives than all forms of violence, including war”. Therefore, it is a crying need of the hour to utilize an effective purification technology in the form of RO and UV that removes harmful impurities as well as deadly germs... Read more"RO+UV Water Purifiers"

RO+UV+UF Water Purifiers

In India, pure, safe and clean water is really hard to find today. In most Indian households water is supplied by the municipality, which is not best suited for drinking purposes. This has led to an increased demand for RO+UV+UF water purifiers. Let us find out why and when to... Read more"RO+UV+UF Water Purifiers"

How to Find Govt Approved Water Testing Lab Near Me

What is the Need for Testing Drinking Water? At the time of writing this post (19th July 2022), the total number of water samples, tested in India by the Govt. approved water testing labs, was 58,95,420. (Source: JJM-WQMIS) Out of these total samples, 8,47,708 samples were found contaminated. This means... Read more"How to Find Govt Approved Water Testing Lab Near Me"

Kent Grand Plus 8-Litre Mineral RO + UV/UF with TDS Controller Water Purifier

admin0 comment

Review of Kent Grand Plus

Kent Grand Plus is fully automatic and a feature-packed water purifier from Kent RO. It employs an extensive RO+UV+UF purification mechanism with TDS control, which ensures that your family is getting the safest drinking water all the time. Its high-end features, effective performance, and 4 years of free service are a great value for your money.

Kent Grand Plus employs the double treatment of RO and UV purification, which naturally makes it one of the most sought-after purifiers in India.

Top Features of Kent Grand Plus RO Water Purifier

  • Purification Technology: RO+UF+UV+TDS Controller. Double purification of RO/UF+UV removes harmful bacteria and dissolved impurities, making water 100% pure
  • Storage Capacity: 8 litres
  • Applications: Suitable for purifying brackish / tap water and municipal corporation water
  • Purification Capacity: Up to 20 litres per hour
  • Save Water Technology: Recovers more than 50% water as purified water and stores the rejected water in a separate tank for reuse of RO waste water
  • Alert Mechanism: Computer controlled operation with Filter Change and UV Fail alarms
  • UV Lamp: 11 Watt UV lamp for deactivating harmful bacteria and microorganisms
  • Filter Cartridges: Sediment, Carbon block filter, UF, and Post-carbon
  • Material: ABS Food Grade Plastic
  • Automatic: Fully automatic with auto-on and auto-off function
  • Mounting: Wall mounted
  • TDS Control Valve: It allows the user to control the content of natural minerals in the purified water
  • Extra Accessories: Push-fit components for leak-proof performance, User manual, Warranty card and Service center details
  • Indication: Purified water level indicator
  • Power Supply: Operates on electricity with built-in SMPS for frequent power fluctuations
  • Certifications: WQA (USA & India), NSF (USA) and ISI (India)
  • Installation: Free of cost at customer’s premises
  • Warranty: 1-year warranty + 3 years free service

Filtration Process of Kent Grand Plus RO + UV/UF+TDS

The Kent Grand Plus purifies water in 7 advanced stages:

Stage 1 – Sediment Filter

The sediment filter is used in the first stage of purification where input water is allowed to pass through it. This process of filtration effectively filters out all the impurities, dirt, particulate matter and suspended solids.

Stage 2 – Activated Carbon Filter

The water thus filtered from sediment filter is then fed into the activated carbon filter. This stage is very crucial in filtering out chlorine, organic compounds, bad odor as well as unpleasant taste from the water. Carbon is highly capable of blocking all the unwanted impurities and the water received at the end of this process is much purer.

Stage 3 – RO Filtration

This is the most crucial stage of purification in which a semi-permeable membrane is used. The RO filtration removes all the dissolved organic salts and other harmful contaminants. The reverse osmosis process of filtration requires an optimum pressure close to 30-40 psi to be applied to the water. It makes water molecules pass through the membrane while leaving behind the suspended impurities. In addition to the dissolved salts, RO filtration removes heavy metals like lead, pesticides, nitrates, and sulfates.

Stage 4 – Ultrafiltration

This is the fourth stage of purification in which water from the previous stage is allowed to pass through ultra-filtration. The UF membrane acts as a powerful line of defense in which macromolecules are trapped and removed. Sometimes much smaller and invisible impurities remain in the water. Even these impurities are filtered out due to the extremely small pore size of the UF membrane, which is 0.01 micron. This technology uses fine threads of fibers and also removes extra-hardness from the water.

Stage 5 – TDS Controller

This stage of filtration employs a TDS controller that helps in controlling total dissolved solids in the water coming out of the Kent RO membrane. The RO process along with reducing the hardness of the water also removes essential natural minerals. Thus, the TDS controller makes sure that these minerals are retained in the water. The output water from the TDS controller is safer, healthier, purer and enriched with minerals.

Stage 6 – Ultraviolet Filtration

It is the next step of filtration in which UV technology is utilized which effectively kills bacteria, viruses, and disease-causing germs. The UV filtration uses an 11 watt UV lamp from which ultraviolet radiations are spread in the water. It deactivates all the microorganisms to make water safe and free from germs.

Stage 7 – Post Carbon Filter

It is added to bring up the flavor of the water and enhance the taste as well.

https://www.youtube.com/channel/UCkV-GcSEokhTnXQJCGpNEMg

Review of Other Features of Kent Grand+ Water Purifier

Elegant Design

The attractive design and the transparent cover of Kent Grand Plus look great at any place in your home. Its convenient usage makes it a perfect machine for any kitchen, restaurant, or hostel. You can see all the components functioning inside the upper cabinet, while the water level indicator of the storage tank allows you to know the level of water inside.

TDS Controller

The TDS control valve serves a very significant function which results in the reduction of TDS levels up to 90 percent. This feature is not available in any other water purifiers. This function also makes sure that natural minerals in the purified water are intact. TDS control ensures healthier and better-tasting water.

Global Certifications

Kent Grand Plus is tested and certified by distinguished laboratories and important quality centers around the country. It has won NSF and WQA Gold Seal in the United States. Therefore, this fact reflects that this water purifier is extremely reliable. It is also CE and RoHS certified.

Leak Proof Design

Kent uses high-end design technology which makes leak-proof and its push-fit components take care of leakage and wastage of water. These fittings come with rubber O rings that are built in to provide additional protection against leakages. It is made of ABS plastic and its food grade quality makes it safe, durable and highly reliable.

Save Water Technology

In conventional RO Technology, about 80% of water gets wasted and only 20% of water is recovered as purified water. This means you needed 10 Litres of input water for every 2 litres of purified water. KENT Grand Plus employs Save Water Technology which recovers more than 50% water as purified water. And the best part is, unlike other RO purifiers, the rejected water is stored in a separate tank. And that waste water can be utilized for other home tasks like gardening, mopping, washing, etc. Thus Kent Grand+ resulting in less to no water wastage.

Kent Grand Plus Specifications
Model Name Grand Plus
Storage Capacity 8 L
Purifying Technology RO+UV+UF
Filtration Capacity 20 L/Hr
Filter Cartridges Sediment, Carbon Block Filter, UF & Post Carbon
Maximum Duty Cycle 100 Litres/Day
Power Consumption 60 Watt
Membrane Type Thin Film Composite RO
Booster Pump Voltage 24 V DC
Inlet Water Pressure/Temp (min) 0.3 Kg/cm2 or 4.3psi / 10°C
Inlet Water Pressure/Temp (max) 3 Kg/cm2 or 42.7psi / 35°C
Membrane Housing Spin-welded RO membrane housing
Width 25.5 cm
Height 53.5 cm
Length 39 cm
Weight 9.4 kg

Found this review for Kent Grand Plus Water Purifier useful?

Please leave a comment below or share your love by connecting with us on Facebook. And, check top offers on water purifier from Amazon and Flipkart and save money on your water purifier.

Save Water Slogans In Hindi

admin0 comment

Water is life. Save water and secure the future. Here are some excellent water conservation slogans in Hindi:

Top Slogans

  • If there is water, there is a future; without water, everything is desolate.
  • Know the value of every drop; secure the future.
  • Water conservation: both a necessity and a duty.
  • Protecting water, securing the nation.
  • Water is a priceless gem of life; make an effort to conserve it.

Short and Effective Slogans

  • Save water, save life.
  • To secure the future, save water today.
  • Drop by drop, the pitcher fills; save water to enrich life.
  • The thirsty earth cries out for water; do not waste it.
  • Do you need these slogans for making posters or for a speech?

What is TDS in Water, it’s Health Effects and How to Reduce the TDS Level?

admin0 comment

TDS (Total Dissolved Solids) represents the total concentration of all the dissolved substances in water.

TDS in water comprises inorganic salts and a small amount of organic matter.

Common inorganic salts that can be found in water include calcium, magnesium, sodium, and potassium, which are all cations, carbonates, bicarbonates, chlorides, nitrates, and sulfates, which are all anions. Cations are positively charged ions and anions are negatively charged ions.

The most important thing to note here is that the impurities, like dust, dirt, mud, and rust, do not constitute Total Dissolved Solids. This is because these impurities remain suspended (or settle at the bottom) in water and do not dissolve.

Dissolved solids can easily pass through a filter with 2-micrometer (or smaller) pores. But the suspended/settleable solids can be easily filtered out with such a filter.

From Where Do these Dissolved Solids Come in Water?

TDS in water supplies can originate from both natural sources and as a result of human activities. Sewage, agricultural and urban run-off, and industrial wastewater are the most common sources of Total Dissolved Solids in water.

Rivers flowing through mountains contain water with high levels of dissolved solids because the water flows through rocks that have mineral deposits and high salt content.

The most common dissolved solids are calcium, magnesium, phosphates, nitrates, sodium, potassium, and chloride. Mostly found in groundwater and river water, these are naturally occurring and are harmless for the human body.

However, some constituents of TDS like pesticides, lead, arsenic, and fluoride can be very harmful to human health. These constituents enter water as a result of human activities like sewage, agricultural and urban run-off, and industrial wastewater.

Why Do you Need to Measure Total Dissolved Solids?

Because testing the level of TDS in your water is the easiest way to analyze the overall quality of your drinking water.

Although there is no proof of any negative health effect of high or low TDS levels, it is used as an indicator of the presence of a broad array of chemical contaminants.

The Bureau of Indian Standards (BIS) has set the acceptable limit of TDS in drinking water at 500 mg/L.

Drinking water, with TDS levels higher than 1000 mg/L, is generally considered unfit for human consumption. A high level of TDS is also a direct indicator of potential concerns and calls for a thorough analysis.

Mostly high levels of TDS in drinking water are a result of the high concentration of minerals like calcium and magnesium. These minerals have little or no short-term health effects. But harmful and toxic contaminants like lead, arsenic, cadmium, nitrate, and others, have a serious effect on your health.

If you are living near highly polluting industrial zones and agricultural regions with a long history of using chemical fertilizers and pesticides, then there is a very high probability of these toxic contaminants mixing with the water source.

In such a case, apart from testing the TDS level of the water, you should also get your water tested in a laboratory for finding the presence of any harmful or toxic contaminants.

In areas where the TDS content of the water supply is very high, the individual constituents should be identified and the local public health authorities consulted.

What Happens to the Water When TDS is High?

a) The high concentration of dissolved solids in water causes water filters to wear out sooner. If the water at your home has high levels of TDS then you will have to replace the filters and membranes more frequently as compared to homes that have low TDS water.

b) A high level of TDS in water makes the water taste bitter and salty. In a study conducted by the World Health Organization (WHO), the palatability (acceptable taste) of drinking water has been rated by panels of tasters in relation to its TDS level as follows:

c) Bathing with high TDS water makes your skin rough and dry. It also damages your hair making them rough and dry, causing dandruff and hair fall.

d) Calcium and magnesium, two minerals commonly found in TDS, can cause water hardness, scale formation, and staining. High levels of minerals in water lead to scaling on bath fittings, water pipes, water heaters, and household appliances.

e) The high TDS level makes water hard. Apart from drinking, hard water poses several other challenges like soaps and detergents do not produce as much lather.

Are you worried about the excessive dryness of skin and sudden hair fall or dandruff? Chances are it is because of the calcium and magnesium minerals that make your water hard. Changing your soap or shampoo is not the solution. The solution is quite simple, you need to use a hard water softener for your bathroom. Hard water softeners are small, affordable, and easily fit on any tap or showerhead. We have written a detailed post on how hard water softeners can bring back the softness and shine of your skin and hair. This post also covers the best water softeners reviewed by our experts.

Health Effects of High TDS in Drinking Water

It is a widely known fact that high levels of TDS in drinking water can give water a bitter or salty taste, but it is not harmful to your health. In fact, minerals like calcium and magnesium, which are often the reason behind high TDS levels, are actually beneficial to your health.

However, if the TDS level of your drinking is above 500 PPM then it is recommended that you get the water tested for harmful impurities like lead, arsenic, mercury, fluoride, etc.

A high TDS level is usually not a health hazard as long as the dissolved solids are essential minerals and not harmful heavy metals and chemicals.

No health-based guideline value is proposed for TDS. However, drinking-water guidelines are available for some of its constituents, including lead, arsenic, cadmium, fluoride, nitrate, etc.

If you suspect or if the laboratory tests point to the presence of lead, arsenic, mercury, fluoride or other harmful impurities then you should use a multi-stage RO water purifier.

You may want to look at the top RO water purifiers for purifying high TDS water.

Is Low TDS Water Harmful?

Water with an extremely low level of TDS is undesirable for most consumers because of its flat, dull taste.

Also, demineralized or very low TDS water is not suitable for athletes and people with highly active lifestyles. But for most people, drinking water with a low TDS value doesn’t pose any health concern.

 

Useful read – Is 25 TDS Safe for Drinking Water?

Water is not the only source of essential minerals like calcium and magnesium. The food that you eat also contains these minerals. Your body’s mineral requirement can be easily fulfilled by the food that you eat.

Apart from the dull taste, water with excessively low TDS is more corrosive and can leach harmful metals such as lead or copper from plumbing pipes and hardware.

Drinking water with moderate amounts of TDS is the best. Water with moderate TDS tastes better than water with very low or very high TDS levels.

What are the Guidelines for TDS in Drinking Water in India?

World Health Organization (WHO) report on TDS in drinking water points out that reliable data on possible health effects associated with TDS in drinking water is not available.

No health-based guideline value is proposed for the ideal TDS of drinking water. Because TDS in water can be high because of many factors so, in areas where the TDS content of the water supply is very high, the individual constituents should be identified.

The Bureau of Indian Standards (BIS), the organization that defines the drinking water quality guidelines in India, has set the acceptable limit of TDS in drinking water at 500 mg/L. However, the guidelines also mention that in case no alternative source of drinking water is available, then this acceptable limit can be relaxed to 2,000 mg/L. The BIS report also mentions that if the TDS level of the drinking water is higher than 500 mg/L then this may result in a decrease in palatability (acceptable taste) and may cause gastrointestinal irritation.

How is TDS Measured?

There are two methods of measuring Total Dissolved Solids in water: gravimetric analysis and conductivity.

Gravimetric Method

The gravimetric method is the most accurate but it is time-consuming. In this method, the liquid solvent or water is evaporated and the weight of the remaining residue is measured to calculate the TDS level. This method is ideal in case of high TDS concentrations and if inorganic salts constitute the majority of TDS.

Electrical Conductivity

Electrical Conductivity is the most popular and also the easiest method to find out the TDS of drinking water. The electrical conductivity of water is directly related to the concentration of dissolved ionized solids in the water. TDS meters work on the same principle of conductivity. Although this method is not accurate as the gravimetric method, it is definitely the quickest and easiest way to find out an approximate value for the TDS level in the water.

You may like to check our detailed post on how to check the TDS level of water at home.

How to Reduce or Remove TDS in Water?

There are 3 major ways to reduce or remove TDS in water:

Reverse Osmosis (RO)

Reverse Osmosis or RO purification is the most popular water purification technology to get rid of excessive dissolved solids in the water. RO process removes virtually all dissolved impurities, including essential minerals and harmful heavy metals like lead and arsenic.

The process uses specially designed RO membranes with a pore size as small as 0.0001 microns. The small pore size only allows water molecules to pass through and filters out every other impurity. Most RO membranes reduce the TDS level by up to 90-99%.

Distillation

Distillation removes contaminants through the same process used in nature, evaporation. The process involves boiling water to produce steam or water vapor. As water is boiled, water evaporates in form of steam but the dissolved solids are unable to evaporate. The steam rises to a cool surface, and once the steam cools down it condenses back into the liquid form.

Deionization

The Deionization process removes total dissolved solids through ion exchange. The process uses specially manufactured ion-exchange resins to exchange water ions with charged ions or dissolved solids. Deionization produces highly pure water that is very similar to distilled water. The advantage of deionization over distillation is that the process is quicker and does not result in scale build-up.

For homes, Reverse Osmosis (RO) is the most often used technique for tackling the problem of high TDS in water.

Conclusion

Whether the TDS level is a cause of worry or not depends on the kind of minerals, metals, and chemicals that make up total dissolved solids in your water supply. Unfortunately, this is not as easy as finding the TDS level as it requires more advanced testing.

TDS is not the only indicator of how pure or contaminated your drinking water is. TDS is only one of several indicators of the purity of water. Water may contain a whole lot of contaminants like mud, dust, rust, sand, bacteria, viruses, cysts, and more.

The water purification technology you use depends on the source and quality of the water. For more details on how to find the best water purifier for your home, you should check the water purifier buying guide.

Top 6 Innovative Ways to Re-Use the Waste Water from RO Water Purifiers

admin0 comment

Most Indian homes use RO water purifiers, but very few know about the side effects of using one.

This isn’t surprising. RO water purifiers provide reliable water purification, but they often lead to unnecessary wastage of water.

Should you stop using RO water purifiers?

OR

Stop worrying about the wastage of water?

Out of all the water purifier technologies, RO water purification is the most reliable. And if your home/office has high TDS water then you have no choice but to use an RO water purifier.

What if we tell you something that lets you enjoy the trustworthy RO purification without having to worry about the wastage of water?

You just need to know about some easy ways to re-use RO waste water, and then take action.

In this guide, we’ll go through six actionable ways to re-use RO waste/reject water to reduce water wastage.

But first, let’s go over the basics.

Why Re-Use RO Waste Water?

Using RO water purifiers not only gives us safe, clean and tasty water but also protects us from life-threatening waterborne diseases.

But there is one big drawback of using RO water purifiers i.e. the excessive wastage of water. An average RO purifier wastes approximately 3 litres of water for every 1 litre of purified water. That means only 25% of water is purified and 75% of water comes out as waste.

Wondering why so much water is wasted? Reverse Osmosis (RO) purifiers use membrane technology to filter dissolved impurities, the impure water is filtered out and is often called waste water or reject water. The percentage of waste water varies according to the RO purifier being used.

Because of the high level of impurities and dissolved solids, this reject water is not fit for drinking or bathing.

However, the RO waste water can be used in various ways to avoid the overall wastage of water in your home or office.

Before we check out how you can use this waste water, let’s look at some things to be kept in mind beforehand.

Things to Keep in Mind Before Using the RO Waste Water

It is best to determine the TDS level

To be 100% sure, if possible, the waste water should also be tested for the presence of inorganic and chemical impurities like Sodium.

In addition to the TDS level, a few websites and several videos on YouTube also suggest checking the pH value of the RO reject water. But there would hardly be any difference in the pH value of the input water and the RO reject water. So you need not worry about the pH value of the Reverse Osmosis waste water.

How to Store the RO Waste Water?

The easiest way would be to drop the reject pipe in a bucket. But if your daily drinking water requirement is 20 litres then on an average your RO water purifier would generate around 60 litres of waste water.

Assuming you are using a bucket of 15 litres, you would need to empty the bucket 4 times in a day. And the biggest pain is keeping a check on the bucket, so it does not overflow.

This may not be practical for a lot of users.

If you are one of those then worry not because we have a better solution for people like you.

You can extend the RO waste pipe and drop it in a big tank placed outside your kitchen. This stored water can later be re-used for one of the several ways listed below.

You can use a small submersible pump (like the ones used in water coolers) for taking water from this tank. All you have to do is drop the submersible pump in the tank and connect it to a power source.

You can then use a water pipe connected to the outlet of the pump to draw water from the tank without using any bucket or container. A bigger tank also means that you do not have to worry about the water overflow, as would be the case if you were using a bucket in place of a big tank.

The bucket, container or tank used for storing Reverse Osmosis waste water should have a wide opening so you can easily clean the deposits at regular intervals.

in the reject water before deciding to reuse for other purposes.

If the TDS level of the RO waste water is too high, then it might not be suitable for re-use in most of the applications given below.

6 Easy Ways to Re-use RO Reject Water

1. Wash Your Car

A single car wash could consume anywhere between 14 litres (for car wash using a bucket) to 75 litres (for car wash using a hosepipe) of water. Keeping in mind the scarcity of drinking water, using so much potable water for car wash seems unreasonable and no lesser than a crime.

We believe, washing cars every day not only wastes a lot of water but is unnecessary. If you are using an RO water purifier at your home or office then you can simply store the waste water in some tank or bucket and reuse it for washing your car. Water with a TDS level of 1200 – 1500 PPM can be safely used for car washing. If the TDS level of waste water is high you can mix tap water to dilute it. This should lower down the TDS level.

2. Watering Your Plants or Home Garden

If you are someone who loves gardening or have planted some plants in pots, the wastewater can be used for watering your plants to keep your indoor or terrace garden green. This tip is particularly useful for people living in urban areas as the TDS level in municipal water tends to be lower.

To be on the safer side, you can start with a few plants. Use the RO waste water for 15-20 days and check its effect on the growth of your plants. Each plant will respond to this change differently, which will give you a clear understanding of which plants are responding better to RO waste water. For gardening/irrigation use, a TDS level of up to 2100 PPM is permissible. You should also check out the percentage of Sodium, it should be less than 60 % ( 1.e. Na / Na + Ca + Mg). High Sodium content causes loss of soil porosity and therefore harmful to soil fertility in the long run.

3. Wash Your Utensils

Another useful application for Reverse Osmosis waste water is to wash your utensils. Simply store the waste water in bucket or tank, make sure you place the bucket for collecting RO waste water near your kitchen sink so it can be used easily when you clean your utensils.

We found this useful YouTube video that shows you how you can easily re-use the RO waste water in your kitchen for washing utensils.

4. Floor Mopping

Using the RO waste water for mopping the floor is easy and will definitely save tens of litres of clean water every day. If you have a bigger house then the savings could be in hundreds of litres every single day. If the TDS level of waste water is high (over 2000 ppm):

  • Dilute waste RO water with an equal quantity of tap water. Because plain Reverse Osmosis waste water with high TDS may stain or leave salt particles on the floor.
  • Use the RO waste water for floor mopping on alternate days. This will reduce the chances of any stains or salt deposits.

5. Pre-rinsing Laundry

You can use the RO waste water for daily laundry as well, but please keep in mind that using high TDS water might not be suitable for some delicate fabrics. Most of the Indian homes now use washing machines, though washing machines save a lot of time and effort but also result in a lot of wastage of water. You can create an overhead tank that collects the RO waste water and use the waste water from this tank directly in your washing machine (do keep in mind the fact about delicate fabrics)? This tip works best for semi-automatic & twin tub washing machines.

6. Cleaning and Flushing Your Toilets

Another big source of clean water wastage in modern homes is the use of toilet flush. Every single flush sends approximately 5 to 7 litres of potable water down the drain.RO waste water can be used effectively to reduce this wastage of clean water by using it to flush your toilets. When you start, always monitor your toilet seats for any discoloration on porcelain surfaces after a few days. With a periodical cleanup using common toilet cleaners, the chances of discoloration and salt deposits can be avoided.

Looking for an RO purifier that produces very little or no waste water? Check out KENT RO Water Purifiers. These purifiers use Save Water Technology which recovers up to 50% pure water and stores the rejected water in a separate tank.

Every year we read and listen to the news of farmers committing suicide because of droughts. And there are thousands and lakhs of families in our country who have to travel for miles every day to collect drinking water. If you are fortunate enough to be blessed with sufficient water supply, think of it as a privilege.

Do your bit by saving every drop of water. These small measures can really make a lot of difference because EVERY DROP COUNTS.

Top Proven Benefits of Drinking Right Amount of Water Daily

admin1 Comment

Water is the most easily available compound and is absolutely essential for bare survival. A human being can go without food for long periods of time but gives up within a week if left without water. So it is imperative to have water in the correct amount. Pure drinking water is the healthiest fluid you have access to pretty much all day long if you have a good water purifier at home and work.

Listed below are some of the basic but important advantages which show that water is the healthiest drink one can have.

Pure Water is the World’s First and Foremost Medicine. – Slovakian Proverb

Helps Prevent Cancer

Water has been found to help decrease the risks of cancer by a wide margin. For example, it helps reduce breast cancer, colon cancer (by around 45%) and bladder cancer (by 50%).

Clears Your Head

While the reasons are not known exactly, a study in London found that there is a link between students bringing water to the exam hall and better grades. Water has also been found to have a direct effect on moods, with dehydration leading one to become more grumpy and depressed and disoriented.

Helps You Perform Better

Water forms as much as 75% of our muscle tissues. This means that not drinking enough water can mess with the electrolyte balance, resulting in muscle fatigue. You should also stay hydrated during exercising. The American College of Sports Medicine recommends consuming 17 ounces of liquid up to 2 hours before you begin exercising. And always take care to replace the body fluid lost by sweating as dehydration during exercising can form blood clots.

Makes You Lose Weight

While water doesn’t contribute directly to weight loss, it is an ideal substitute against beverages with high-calorie content. Drinking water at regular intervals helps in decreasing cravings. Also, eating food containing a lot of water actually is a great way to reduce weight as such food items are usually voluminous, require more chewing and the body takes a long time to absorb them.

Lessens Joint Pain

Drinking a good amount of water helps in keeping the cartilage hydrated and lubricated. This is the principle on which glucosamine works – it helps the cartilages in absorbing water, meaning that you should also increase your water intake once you start taking it.

Flushes Out Toxins

Bloody fluids are the medium for transporting waste products away from the cells to your kidneys. The main body toxin, blood urea nitrogen or BUN, is a water-soluble compound that is eliminated through urine. Drinking the right amount of water relieves the stress on kidneys and helps your urine remain colorless, odorless and less concentrated. Drinking enough water is all the more important in warm climates in order to prevent kidney stones.

Makes Your Skin Glow

Water hydrates the skin, meaning that it can act as a fix for regular wear and tears. It also works wonders when dealing with tired skin cells. However, don’t expect over-hydration to act as a magic fix for ageing effects. Water helps in the regeneration of skin cells and helps maintain the color and texture of the largest organ in our body. This is one of the best drinking facts about water for many beautiful girls out there.

Helps Improve Circulation

Water is essential for the proper distribution of nutrients as it is the biggest component of body fluids. Water also helps in the proper distribution of temperature in the body. Water happens to be helpful in digestion as it keeps things moist in the stomach, aiding gastrointestinal movements. An inadequate amount of water would make the colon absorb water from the excretory mass in your stomach, making you constipated.

How to Ensure the Intake of an Adequate Amount of Water?

While the good effects of water are evident, it often becomes difficult to have enough water during the course of the day. The most common reasons for this are laziness and neglect, busy schedules, and the general tendency to give in to more attractive fluid options. So, here are listed some ways to help you with drinking the right amount of water daily:

  • Always carry water with you. In that way, you won’t be ignoring your thirst. Be it on your office desk, your car or the water bottle holder of your gym machine or bicycle, keep a tumbler or a bottle handy.
  • Think of your wallet next time you have the urge of spending some bucks on that awesome mocktail. Water is your basic right and happens to be one of the cheapest things that you can lay your hands on. Besides, not all drinks would relieve you of your thirst. If you find it too bland, you can add a basic flavoring agent to your bottle of water.
  • Get some food with high moisture content. It can be soup, fruits like watermelons and lemons, celery, etc.
  • Use one among the many apps available to motivate you to take the correct amount of water at the right time. You can also make use of natural motivators like having something spicy at regular intervals.

However, keep in mind that while maintaining the correct amount of water intake can be a challenge for most of us, some health junkies have been known to overdo it. It is best not to have more than 2 litres of water per day. Excess water can lead to electrolyte imbalances, water poisoning, and other serious and sometimes fatal problems.

10 Health Benefits of Drinking Copper Water

admin0 comment

For ages, our elders have advised us to drink water from the copper vessel to reap health benefits. Perhaps, most of our elders still drink water from the copper vessel, but the younger generation has now switched to plastic or other metallic bottles.

Since our old traditions are making way back to the present, it’s high time to know the benefits of drinking water in a copper vessel. Before focusing on the benefits of drinking water in the copper bottle, let us throw light on the importance of copper for our bodies.

Copper is one of the essential trace minerals which offers numerous health benefits. It helps in making red blood cells and collagen. It also plays a vital role in the production of energy.

Now that you have an idea of the importance of copper in our bodies, let us have a look at the science behind the ancient Indian practice of drinking water in copper vessels.

Table of Contents

The Science Behind the Ancient Indian Practice of Drinking Water from Copper Vessels

The concept of drinking water in a copper vessel is not new. It is something that was always suggested during Ancient times. But now we also have science backing the age-old logic.

A recently published article, in the Journal of Health, Population, and Nutrition, discussed the result of storing water contaminated with harmful bacteria like Salmonella and E.Coli in a copper vessel for 16 hours. Would you believe that no traces of bacteria were found in the water after 16 hours and the quality of the water also improved?

This is just one of the many studies that prove the benefits of drinking water in a copper vessel. Studies have also confirmed that the copper vessel has an inhibitory effect on the bacteria and this, in turn, purifies the water and makes it potable.

There is also a myth that after the water has been stored in a copper jug, the amount of copper in the water increases beyond the permissible limit. It is considered one of the side effects of drinking water from a copper jug but WHO has busted this myth and has revealed in a study that the copper quantity stays within the permissible limit and it is not only safe but healthy to drink water from a copper vessel.

Various other studies have explained the science behind the ancient Indian practice of drinking water from copper vessels and all of them have given a positive conclusion.

If you want to purify your drinking water naturally, just store it in a copper vessel for at least four hours, and you are good to consume the water.

Let us now focus on the health benefits of drinking water from a copper vessel.

10 Health Benefits of Drinking Water from Copper Vessel

1. Helps in Weight Loss

One of the most important benefits of copper water is that it helps the digestive system to perform in a better manner and not only this, but it also breaks down the fat stored in your body. The broken-down fat is then eliminated from the body efficiently. Drinking water from a copper vessel in the morning helps in weight loss. If you want to lose weight efficiently without much exercise, you should drink copper water i.e. the water stored in a copper vessel.

2. Improves Digestion

Copper has anti-bacterial properties, and thus it helps in killing harmful bacteria in the stomach, and in turn, it improves digestion. It is also an excellent remedy for infection and ulcers. You can also drink water stored in a copper vessel for detoxifying your body. The copper mineral gets leached when you store drinking water in a copper vessel. The copper-rich water breaks down the food particles and helps in improving digestion. If you want to improve your digestive system, drinking copper-infused water is one way of doing it.

3. Slows Down Ageing

As we age, fine lines or wrinkles appear on the face. Copper has natural anti-oxidant properties. It also has cell-forming properties. If you want to slow down the aging procedure, you can use copper-infused water for fighting off the free radicals.

4. Good for Heart and Beats Hypertension

The American Cancer Society has discovered that copper helps in regulating blood pressure and heart rate. It is thus, good for the heart. Apart from that it lowers the level of bad cholesterol and beats hypertension effectively.

5. Beats Arthritis And Inflamed Joints

We have already discussed the anti-inflammatory properties of copper. This property of copper can be used effectively for getting relief from pain due to inflamed joints. If you are suffering from arthritis or inflamed joints, drinking water in a copper vessel can be the perfect remedy for you.

6. Beats Anaemia

When the level of copper is low in our bodies, we absorb less iron. This deficiency of iron results in anemia. The iron absorption in the body can be increased naturally with the help of copper. As the copper intake increases in your body, the iron absorption will increase too, and this will help you to beat anemia.

7. Boosts Immunity & Heals Wounds Faster

Copper is known for its anti-inflammatory, anti-bacterial, and anti-viral properties. You can use copper-infused water for healing wounds faster.

Another amazing health benefit of drinking Copper water is the strengthening of the immune system. Copper not only helps in quicker healing of external wounds but it also aids in fighting against any internal infection.

8. Regulates the Working of the Thyroid Gland

Copper is an essential mineral that controls the working of the thyroid gland. Copper energizes the thyroid and prevents too much of excretion from the thyroid gland in the blood. However, there should be a balance in the copper intake for the proper functioning of the thyroid gland. So instead of consuming too much copper, one should consume it in limited quantity, and drinking water from a copper vessel is a perfect way to ensure that.

9. Boosts Skin Health And Melanin Production

Copper can also be used for improving your skin health. It supports the production of melanin which is the pigment responsible for the color of your skin, hair, and eyes. It also prevents the graying of the hair. The copper mineral because of its cell-producing properties helps in skin regeneration. It improves the softness, elasticity, and firmness of the skin.

10. Antimicrobial, Fights Infections

We have already discussed a study in the previous section where it has been proved that copper has antimicrobial properties. It can kill harmful bacteria effectively and helps in fighting against infection rigorously.

Tips on Drinking Water from a Copper Vessel, Correctly and Safely

Drinking water from a copper vessel can be very beneficial as discussed above. But, just drinking water from a copper vessel is not enough; it is essential to drink water from a copper vessel correctly and safely to extract maximum benefits. Here are a few tips for drinking water from a copper vessel correctly.

  • The quality of the copper used in a copper vessel plays an important role. Buy the copper vessel from the authentic copper seller. Also, make sure that the vessel is made of 100% copper.
  • After you purchased a new copper jug or bottle, do not drink water directly from it. Instead, wash or rinse it with a natural acidic solution. You can also use lemon and salt for cleaning the copper vessel.
  • If you want to avail the maximum benefit of water stored in a copper vessel, then store the water in the copper vessel for at least eight hours. You can store the water in a copper vessel at night and then drink it early in the morning.
  • Do not drink water that has been stored in a copper vessel for more than 12 hours.
  • Do not store any liquid other than water.
  • Never deep freeze the copper bottle or jug.

Do not keep drinking water from a copper vessel all day long. Excess of anything is bad, and the same thing is applicable in the case of copper too.

Drinking copper water once a day will help you balance the copper intake.

Myths Around Copper

One prevalent myth is that copper is poisonous to your body. This is not true; in fact, copper is one of the essential elements of the body. It is an important mineral for our enzyme system, and it helps in different kinds of metabolic procedures. Copper is poisonous only if you end up consuming corroded copper. It is therefore essential to buy a copper jug or bottle that is made of 100% copper.

Copper is not produced in our body naturally and therefore; you need an external source. And the best way of doing so is by drinking water from a copper vessel.

Also, just drinking water from a copper vessel is not enough. You have to store water in the copper vessel for eight hours at least and then consume it for gaining maximum benefits. When you allow water to sit for an extended hour, the copper is absorbed by water, and it acquires many valuable properties that can be beneficial for the body.

Are There Any Side Effects of Drinking Water from Copper Jug?

There are no side effects or disadvantages of drinking water in a copper vessel if you consume copper water as recommended.

However, as discussed above, you should not drink copper water all day long. Drinking copper water once daily is more than sufficient.

If you drink copper water in excess quantity then it can cause nausea, vomiting, diarrhoea, gastric (stomach) issues, and headaches. And if you drink excess copper water for far too long then it can also cause serious damage to your liver.

Important Things to Consider While Buying a Copper Jug or Bottle

As discussed above, there are several health benefits of the copper bottle but we should also keep a few important things in mind while buying a copper jug or bottle:

  • Buy only 100% copper vessels. Do not purchase copper vessels which are mixed with other metals.
  • Buy copper vessels that have a big mouth. It is because it is natural for the copper to tarnish with the passage of time and therefore regular cleaning is needed. A close or narrow mouth will make it difficult for you to wash the vessel. A big mouth copper vessel can be washed easily.
  • Sometimes, the adulterated copper vessel is sold as 100% pure. How will you check whether it is pure copper or not? One of the simplest methods to check the purity of copper is to apply some lemon juice on its surface and then rinse it with clean water. The surface should shine like new. This is a sign of pure copper.
  • Always buy from a reliable brand or offline/online store.

Follow these tips to enjoy maximum copper bottle benefits without worrying about any side effects.

Now that you know how to buy a good copper vessel let us shift our focus on the cleaning process of copper vessels.

Recommendation – Copper Bottle and Jug

How to Wash Your Copper Bottle or Jug

The process of washing a copper bottle or jug is different from washing a regular vessel. You have to clean the copper vessel with your hand and do not use the dishwasher. The dishwasher detergent can lead to the oxidization of the copper vessel which will damage it permanently.

Use a solution of lemon juice and salt in equal quantity, dilute it with water and then use this solution for washing the copper vessel. Do not use any scrubber, soap, or detergent for washing the copper vessel. For best cleaning, use hot water in the copper vessels.

You should clean the copper vessel once/twice a week using lemon and salt.

If you want to wash your copper vessel daily, use a soft cleaning liquid or hot water for cleaning it. You can also use the copper shining powder every now and then to keep the copper vessel shining like new.

Water Purifiers with Goodness of Copper

Keeping in mind the several health benefits that Copper-infused drinking water presents, some leading water purifier brands have launched purifiers that add the goodness of copper to the purified water.

If you are someone looking to take advantage of copper-infused water but feel it is too much of a task to use a Copper vessel.

You should consider buying a water purifier with the goodness of Copper.

We have reviewed two such purifiers for you.

Final Thoughts

Both the Ancient Indian practice and today’s science provide us enough reasons to drink water stored overnight in a copper vessel.

But try not to go overboard with drinking copper-infused water. Just drink once or twice a day from the copper vessel to stay healthy naturally.

The drinking water guidelines of the Bureau of Indian Standards specify 0.05 mg/L as an acceptable limit and 1.5 mg/L as the maximum permissible limit (in the absence of an alternate drinking water source) for copper in drinking water.

How to Make Alkaline Water – Health Benefits & Side Effects

admin0 comment

A lot of health experts advise that maintaining the right pH balance is very essential for keeping ourselves healthy.

And we also believe the right pH balance is indeed very important because a large number of people nowadays suffer from acidity and problems related to acidity.

In order to understand the complex puzzle of acidic and alkaline nature let us first understand what pH value is.

pH stands for “potential hydrogen”, which is basically a measure of the hydrogen ion concentration.

pH value is a measure of how acidic or basic/alkaline a solution is on a scale of 0 to 14. A pH value of 7 is considered neutral, a pH value less than 7 is considered acidic and a pH greater than 7 is considered basic or alkaline.

E.g. if the level is 1, it means the solution is very acidic and if it is 14, it is very alkaline. Alkaline Water has a pH value generally ranging around 8 or 9.

Table of Contents

What is SCMT Filter in AO Smith Water Purifiers?

admin0 comment

If you have read or researched about any high-end RO water purifier from AO Smith then you may have come across a term called SCMT.

Not sure what an SCMT filter is?

SCMT filter is a patented and one-of-a-kind water purification filter from AO Smith.

It is the final stage of purification in AO Smith RO purifiers and functions more or less like a UV disinfection chamber.

If it functions like UV purification, why not use UV then?

Because it does what UV does + a lot more.

You’ll see that in a few moments.

But first, have a look at what the SCMT filter is.

The SCMT stands for Silver Charged Membrane Technology.

And as the name suggests, this filter contains actual silver particles.

Yes, you read that right.

After the grand success of Sona Chandi Chyawanprash, now here we have the Chandi ka filter :).

Jokes apart, the SCMT filter does contain actual silver particles.

As the water passes through this filter, the anti-microbial nature of silver eliminates a range of microbial contaminants present in water.

Diagram Showing the Purification Stages of AO Smith Z9 (image courtesy: AO Smith)

SCMT provides protection from microbial contaminants like viruses, bacteria, cysts, particulates, colloids, endotoxins, and phosphates.

SCMT Vs UV – Which is Better?

Have a look at the below-given comparison of SCMT with UV and UF.

Comparison of SCMT with UV and UF Filters

As you can see, AO Smith’s SCMT filter is far superior compared to UV and UF filters.

No other water purifier brand uses any filter, like AO Smith’s SCMT, with actual silver particles.

List of AO Smith RO Water Purifiers with SCMT Filter

  • X7+
  • Z5
  • Z8
  • Z9
  • ProPlanet P3
  • ProPlanet P4
  • ProPlanet P5
  • ProPlanet P6
  • ProPlanet P7

What do you think of this unique and innovative filter technology from AO Smith?

Do let us know your thoughts and queries in the comment section.

What is TDS Controller/MTDS and Mineralizer? Which One to Choose?

admin0 comment

If you are planning to buy a new RO water purifier and have done some research online or offline then you must have come across some RO purifiers that come with an extra feature called ‘TDS Controller’ or MTDS.

It is also interesting to note that this same feature is sometimes marketed as a ‘TDS Modulator’ by some water purifier brands.

However, TDS Controller, MTDS, and TDS Modulator are one and the same thing and there is no functional difference between each of them.

Different manufacturers use different terms for the same feature or functionality.

While Kent uses the term ‘TDS Controller”, Aquaguard or Eureka Forbes uses the term MTDS (Manual Total Dissolved Solids Controller).

But they all perform absolutely the same function.

What the heck is this TDS Controller/MTDS?

The following text will answer all your questions about the TDS controller in an easy and user-friendly manner.

Let’s begin then.

What is a TDS Controller or MTDS in Water Purifier?

In simple terms, a TDS Controller or MTDS is a device that controls the TDS (Total Dissolved Solids) of water. Unlike the filters, cartridges, and membrane(s), TDS Controller does not filter or purify the water in any way.

The image above shows a typical TDS controller, as you can see this is a small device. This is quite inexpensive and costs roughly around Rs. 50 only.

How TDS Controller Works?

TDS Controller or MTDS is basically a manual device that consists of two water inputs, one water output, and a TDS Control screw.

Water Input 1: Purified water output from the RO membrane

Water Input 2:
a) Purified Water from Activated Carbon Filter in case of RO+UV+TDS Controller Water Purifiers

OR

b) Purified Water from UF Membrane in case of RO+UF+UV+TDS Controller or RO+UF+TDS Controller Water Purifiers

Water Output: Mix of two water inputs in the required ratio.

TDS Control Screw: TDS Control screw controls the TDS value in output water by manually adjusting the flow of water from the two water inputs.

I) If TDS needs to be reduced then the flow of input water from the RO membrane is increased and the flow of input water from the Activated Carbon Filter or UF membrane is reduced.

II) If TDS needs to be increased then the flow of input water from the RO membrane is reduced and the flow of input water from the Activated Carbon Filter or UF membrane is increased.

Simply, Turn the screw clockwise to reduce the TDS level or anti-clockwise to increase the TDS level.

Please note, in most RO purifiers, TDS Controller is located inside the assembly along with all other RO parts. So for adjusting the TDS level, you will have to first open the outer cover.

However, if you are not comfortable doing this, we recommend getting this done by a trained professional.

Recommended TDS Level in Drinking Water?

You should adjust the TDS controller such that the TDS level of purified water is between 80 to 150 ppm.

Must Read

Need and Benefits of TDS Controller?

Natural water contains several essential minerals like Calcium, Magnesium and may also contain harmful impurities like heavy metals, fluorides, and arsenic.

These minerals and heavy metals are what constitute ‘Dissolved Solids’ in water. The level or the presence of these Dissolved Solids in water is commonly referred to as the TDS (Total Dissolved Solids) level of water.

The presence of minerals like calcium and magnesium in small quantities is what makes the drinking water healthy and it is very essential that the drinking water contains these minerals.

RO Membranes usually remove around 90% of dissolved solids from the input water, and that includes essential minerals.

What this essentially means is, if the input water does not have high TDS then chances are the RO Membranes will reduce the level of essential minerals to a significantly low level making the water unhealthy and not fit for drinking.

Relevant Link

Worried about the side effects of RO water on your health?

This is where the role of the TDS Controller comes into effect. As detailed above, in such a scenario when theowaterpur TDS level of the input water is not so high, TDS Controller can be used to increase the TDS of purified water to a healthy level.

The TDS Controller is basically used to increase the level of essential minerals in the purified water.

TDS Controller: Can it be Harmful?

In our opinion, the TDS Controller or MTDS is not an ideal way to add essential minerals to purified water. In RO purifiers with a TDS controller, 100% of the input water does not pass through the RO membrane.

Mixing RO purified water with non-RO purified water may result in the presence of several harmful heavy metals like lead and arsenic in the purified water, as these impurities can only be removed by an RO membrane.

Should you Buy an RO with TDS Controller or MTDS?

Keeping all the above discussion in mind, you should only consider buying an RO purifier with TDS Controller or MTDS if:

• The TDS Level of input/raw water is low (lower than 900 ppm).
• Water does not contain heavy metals like lead and arsenic.

If the TDS level of the raw/input water is high (higher than 900 ppm) or if the water contains harmful heavy metals then you should not choose an RO purifier with TDS Controller.

 The above recommendation is given on the basis of the RO membrane reduces the TDS level by 90%. The lower and higher TDS level limits will change if the RO membrane reduces the TDS level by more or less than 90%.

Be sure to check the specifications of the RO membrane before deciding to buy an RO purifier with TDS Controller or without TDS Controller.

Which Water Purifier with TDS Controller to Choose?

Now, if you have zeroed in on buying an RO purifier with TDS Controller then the following table will help you in finding the perfect match for your home.
TDS LEVEL    IS WATER MUDDY?    PRESENCE OF BIOLOGICAL IMPURITIES?    IDEAL CHOICE
500 – 900 ppm    No    No    RO+TDS Controller/Mineralizer
500 – 900 ppm    No    Yes    RO+UV+TDS Controller/Mineralizer
500 – 900 ppm    Yes    No    RO+UF+TDS Controller/Mineralizer or RO+UV+UF+TDS Controller/Mineralizer
500 – 900 ppm    Yes    Yes    RO+UV+UF+TDS Controller/Mineralizer
Over 900 ppm    No    No    RO
Over 900 ppm    No    Yes    RO+UV
Over 900 ppm    Yes     No    RO+UF or RO+UV+UF
Over 900 ppm    Yes     Yes     RO+UV+UF

Is there any Better Alternative to TDS Controller?

There are now better technologies available to add back the essential minerals removed by RO purification.

RO purifiers with Mineralizer cartridges are a much better option as compared to RO purifiers with TDS Controllers. Because in RO purifiers with Mineralizer feature, 100% of the water passes through the RO membrane. This removes any possible chances of harmful dissolved solids and heavy metals accidentally entering your drinking water.

The next section talks about Mineralizer, the difference between TDS Controller and Mineralizer, and which one is better.

What is Mineralizer or Mineral Cartridge?

RO Membrane does not differentiate between the good particles and the bad particles/impurities. And this is one of the disadvantages of using an RO purifier.

RO also removes essential minerals like calcium and magnesium from the water, so we need some way to add back the minerals removed during RO purification.

One way of doing that is by using a TDS Controller/Modulator, we have already discussed this in detail above.

Another, slightly more effective, way to add essential minerals is ‘Mineralizer or Mineral Cartridge’.

Mineralizer or Mineral Cartridge adds back essential minerals like Magnesium and Calcium in the proper concentration and helps in maintaining proper PH and Acid-alkaline balance in the water.

Below is an image of a typical mineral cartridge:

As you can see in the image above, the mineralizer (AKA Mineral Cartridge) consists of several types of particles. Water passes from one end to the other and several essential minerals are added, and the acidic nature of water is reduced by balancing the PH value.

Difference Between TDS Controller and Mineralizer?

TDS CONTROLLER/MTDS:    

  • 100% of the input water is not passed through RO Membrane.
  • Not ideal for water containing harmful heavy metals like lead and arsenic.
  • TDS Levels of purified water can be increased or decreased.
  • Small and costs very little.

MINERALIZER/MINERAL CARTRIDGE:

  • 100% of the input water is purified by RO Membrane.
  • Since 100% water passes through RO purification, heavy metals like lead and arsenic are removed.
  • No option to control the TDS level of purified water.
  • The size is the same as regular filters and cartridges used in RO purifiers, costing over Rs. 500.

Mineralizer or TDS Controller, Which One is Better?

Both Mineralizer and TDS Controller features are quite useful and provide excellent benefits if used appropriately.

If the water supply contains industrial impurities like lead and arsenic then you should avoid buying an RO purifier with TDS Controller. Apart from that, RO purifiers with TDS Controllers work well in most scenarios.

RO purifiers with the Mineralizer feature can be used for water infected with lead and arsenic but these purifiers have no option to adjust the TDS level as per your requirement.

So, the answer to the question ‘Whether to choose an RO purifier with TDS Controller or Mineralizer’ would actually depend on the factors like the presence of industrial impurities and your choice.

However, we feel RO purifiers with the mineralizer feature have a little upper hand as compared to the RO purifiers with the TDS Controller feature.

The Ultimate Guide for Buying A New Water Purifier

admin0 comment

We’re pretty sure you’re convinced that every penny you spend on a great water purifier is a penny spent wisely, because of the health benefits of drinking purified and uncontaminated water.

Even apart from that, there are dozens of reasons for you to look for the best water purifier and get one home; for instance, water purifiers ensure:

  • Safety from life-threatening waterborne diseases that may be caused by contaminated water
  • That weird taste of chlorine and calcium carbonate is removed from tap water (which means it won’t spoil your coffee!)
  • Little to zero scratchings, spotting, and scaling on the surface of your kitchen utensils.

In Hurry? Jump to: